Network Cabling and Wireless Links · Vancouver, BC

Network Cabling Vancouver

Hexafusion installs copper and fibre network cabling for offices in Vancouver and across the Lower Mainland, and point-to-point wireless links between offices, branches and buildings. Network cabling is the wiring behind the walls and ceilings that connects every desk, printer and wireless access point to the office network. Each project begins with a site visit and a written quote, and ends with tested, labelled cabling and documentation that the organization keeps.

Available to organizations on a Hexafusion plan. See our plans, or request a quote to start a plan.

Cabling that keeps the organization running

A wired network is only as reliable as the cabling behind it. Cabling that is untested or undocumented leads to slow connections, dropped calls and time lost tracing faults. We test every cable run and label it at both ends, so faults are quick to trace and future changes are straightforward.

In plain terms: A cable run, also called a drop, is a single cable from the network room to an outlet at a desk, on a wall or in the ceiling. The network room is the room or closet where the cables meet the network equipment.

Copper cabling for offices

Copper cabling connects desks, phones, printers and wireless access points, the devices that provide Wi-Fi, to the network room. Two grades are the common choices for offices.

Category 6

The standard choice for office desks, phones and printers. It suits the everyday requirements of most offices.

Category 6A

A heavier grade of copper cable that supports higher speeds over longer runs. It is commonly chosen for wireless access points and for offices planning for growth.

What we install

New drops

Additional cable runs and outlets for new desks, printers or other devices in an existing office.

Full office cabling

Every cable run for a new or renovated office, from the network room to each desk and device location.

Patch panels

The panel in the network room where every cable run ends in a numbered port, so each outlet can be connected or moved in an orderly way.

Wall plates

The outlets at each desk or device location where a computer, phone or printer plugs in.

Labelling

Every cable run is labelled at the outlet and at the patch panel, and the labels match the documentation.

Testing each run

Each cable run is tested after installation, and the test results are handed over with the documentation.

Fibre cabling between floors, network rooms and buildings

Fibre cabling carries data as light through thin strands of glass. It is the right choice for long distances and high speeds, which is why it is used for the main links of a network while copper cabling connects the desks and devices on each floor.

Links between floors

A fibre link joins the network equipment on one floor to the equipment on another.

Links between network rooms

Larger offices with more than one network room are joined by fibre, so every area of the office shares one network.

Links between buildings

Fibre joins buildings on the same property into one network.

Termination and testing

Termination is the fitting of a connector to each end of the fibre. Every fibre link is terminated and tested before it is put into service.

Point-to-point wireless links between offices, branches and buildings

A point-to-point wireless link is a dedicated wireless bridge that joins the networks of two sites where running a cable is not practical. Staff at both sites then work on one network, with shared access to the same files, printers and systems.

When it fits

Nearby buildings with a clear line of sight between them, such as a main office and a branch, an office and a warehouse, or two buildings on the same property.

How it runs

A site survey to confirm the line of sight and the mounting locations, a written quote, installation, then alignment and testing of the link.

Racks, network rooms and cable runs for devices

Cabling projects often include the network room itself and the devices that depend on a cable.

Racks and network rooms

Server racks and cabinets, the frames that hold network equipment, together with patch panel layout, cable management and the tidying of existing network rooms.

Wi-Fi access points

Cable runs to each access point location, and mounting of the access points on ceilings or walls.

Security cameras and meeting room displays

Cable runs to the locations where security cameras and meeting room displays are to be installed.

Removal of old cabling

Old abandoned cabling is removed during a fit-out or an office move, which leaves ceilings and network rooms clear for the new installation.

When a business needs cabling

  • A new office or an office move. Cabling is installed and tested before staff arrive, so every seat has a working connection on the first day.
  • A renovation. New walls, rooms and seating plans require cable runs to match.
  • Additional desks. New staff, printers or devices require new drops.
  • A slow or unreliable wired network. Ageing or damaged cabling is a common cause, and testing identifies the runs to replace.
  • Wi-Fi access points and other devices that need a cable. Access points, security cameras and meeting room displays each depend on a cable run.
  • Two nearby sites to connect. Fibre or a point-to-point wireless link joins a second floor, a second network room or a nearby building to the main network.

One project under our name

Small jobs are carried out by our own technicians. Larger installations are carried out with our cabling partner. Either way, the work is delivered as one project under the Hexafusion name, with one written quote and clear ownership of the project from the site visit to the handover.

How a project runs

Step 1

Site visit and floor plan

We visit the office, review the floor plan and confirm the location of every outlet, device and network room.

Step 2

Written quote

The organization receives a written quote for the project. Work begins once the quote is approved in writing.

Step 3

Scheduled installation

Installation is scheduled around the organization's operations. Project work can be scheduled after hours or on weekends, quoted at after-hours project rates.

Step 4

Testing and handover

Every run is tested and labelled. The test results and labelled documentation are handed over to the organization.

How cabling connects to our other services

  • Office IT relocation. For an office move, cabling at the new office is installed and tested before move day, as part of the same project.
  • Network support. Once the cabling is in place, we install and manage the firewalls, switches and other equipment that run on it.
  • Wi-Fi. Access point locations are planned with the cabling, so wireless coverage and cable runs are designed together. Wireless networks are part of our network support service.
  • Managed IT. Cabling is project work on every plan, quoted separately and approved in writing before work begins.

Service area

We install network cabling and wireless links for offices in these Lower Mainland cities. Accounting firms, clinics, engineering firms, property managers, non-profit organizations and other professional offices are typical of the offices we support.

VancouverBurnabyRichmondSurreyCoquitlamLangleyNorth VancouverWest VancouverNew WestminsterDeltaMaple RidgeWhite RockPort CoquitlamPort Moody

See the full list on our service areas page.

Frequently asked questions

Who carries out the cabling work?

It depends on the job. Small jobs are carried out by our own technicians. Larger installations are carried out with our cabling partner. Either way, the work is delivered as one project under the Hexafusion name, with one written quote.

What is the difference between Category 6 and Category 6A cable?

Both are copper network cables and both are common office choices. Category 6 is the standard choice for desks, phones and printers. Category 6A is a heavier grade that supports higher speeds over longer runs, and it is commonly chosen for wireless access points and for offices planning for growth. We recommend one or the other in the written quote, based on the site visit.

When is fibre the right choice?

Fibre is the right choice for long distances and high speeds. It is typically used for the links between floors, between network rooms and between buildings, while copper cabling connects the desks and devices on each floor.

What is a point-to-point wireless link, and when does it fit?

A point-to-point wireless link is a dedicated wireless bridge that joins the networks of two sites where running a cable is not practical. It fits nearby buildings with a clear line of sight between them, such as a main office and a branch, or two buildings on the same property. The work runs as a site survey, a written quote, installation, alignment and testing.

How is cabling work quoted and scheduled?

Cabling is project work on every plan. After a site visit and a review of the floor plan, we provide a written quote, and work begins once it is approved in writing. Project work can be scheduled after hours or on weekends, quoted at after-hours project rates.

What does the organization receive when the project is complete?

Every cable run is tested and labelled. At handover the organization receives the test results and labelled documentation, so any outlet can be traced to its position in the network room.

Can you tidy an existing network room or remove old cabling?

Yes. We install server racks and cabinets, lay out patch panels, organize cable management and tidy existing network rooms. We also remove old abandoned cabling during a fit-out or an office move.

Who are the cabling and wireless link services available to?

Network cabling and point-to-point wireless links are available to organizations on a Hexafusion plan. Organizations that would like to start a plan can review our plans and request a quote.

Request a quote for network cabling

Tell us the office address, the number of desks and devices, and the planned date. We will arrange a site visit and provide a written quote before any work begins. Network cabling and wireless links are available to organizations on a Hexafusion plan. See our plans.

Request a quote

Related services

Office IT RelocationNetwork SupportIT ConsultingManaged IT VancouverPlans
Technician working on network cabling in an equipment rack
A technician working on network cabling in an equipment rack.